Pexto Brakes
  • Model
  • PX24

Pexto Box and Pan Brake

Light duty bending brakes are for light forming requirements (up to 16 gauge mild steel). When used within their rated capacity, they will form a minimum 1/2" flange over their entire length.

  • Maximum Rated Capacity: 16 gauge mild steel

The PX24 Box and Pan Brakes adjustable back gauge are ideal for small, precise box and pan work (up to 3" deep). It will accommodate sheet metal up to 16 gauge. The PX24 will bend as much as a 135¡ angle in up to a 24-inch length. Standard fingers provided include one each 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6". Fingers are heat-treated die steel, precision ground. Set of fingers can be arranged to form 3/4: to 24" in 1/4" increments. Back gauge adjustment is from 0-24". Adjustable friction brake lock stops upper bar dead-weight drop and permits precise positioning of upper bar to scribed line on work piece before final clamping. The pan brakes have optional special fingers to adapt them to inside mitered lip boxes, 9" long square tubes and radius bends up to 1". The floor mount stand shown must be ordered as a separate item.

Minimum 1/4" (PX24) reverse bends are possible with these light duty brakes by removing both the apron angle iron work support and apron filler plate and reducing the capacity by four gauges.


Additional Photos & Video: (click to enlarge)

Extension Fingers (PX24 & PX36) for inside mitered lip boxes, minimum 2 1/2" square box.

Radius Fingers (PX24 & PX36) Available in widths of 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6" with radii of 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 3/4", and 1".

Open End Finger (PX24 & PX36) for forming square tubes up to 9" long, tapers from 3/4" to 1 1/2".

Reference No. PX24
A 34in. / 86cm
B 11in. / 86cm
C 28in. / 71cm
Bench Mount Stand 34w x 30h x 14d
No. PX24 Diagram

No. PX24 Diagram


Specifications No. PX24
Bending length 24in./610mm
Capacity mild steel, 1-Inch flange

bending bar and angle in place:
bending bar and angle removed:
 
 
16ga./1.60mm
20ga./1,00mm
Minimum reverse bend
(bar and angle removed)
1/4in./6.35mm
Maximum lift of beam 1in./25mm
Finger Widths IN.: 3/4, 1, 1-1/2, 1-3/4,
3, 4-1/2, and 6in.

MM: 19, 25, 38, 44.5, 76,
114, and 152mm
Maximum depth of box 3-inches/76mm
Back gauge adjustment 0-24in. / 0-610mm
Shipping Weight 270lbs./125kg
Radius Fingers (Optional) IN: 1/16, 1/8, 3/16, ¼,
5/16, 3/8, 7/16, ½, ¾, and 1in.

MM: 1.6, 3.17, 4.76, 6.35,
7.95, 9.5, 11, 12.7, 19, and 25.4mm
Bench Stand (Optional) 34” long, 14” wide, 30” High
Bench Stand shipping weight 160lbs. / 75kg
Ordering Guide Catalog No. Shipping Weight
Pexto PX24 Box and Pan Brake 155070024 270lbs./125kg
Floor Stand PX24 239006006 160lbs./75kg
Floor Stand PX24 239006006 160
Extension Finger
PX24 Right
PX24 Left
251700107
251700108
3lbs./1.5kg
3lbs./1.5kg
Open End Finger PX24 251700109 3lbs./1.5kg

Radius Fingers Specify radii and width desired Radii Available: 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 3/4", 1" Widths Available: 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", 6"

***PX24 brake standard equipment includes one each 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2" and two 6" box fingers. PX36 has same, except for four 6" box fingers.





Site Designed & Maintained by: Colloredo & Associates